Epson Printer or other Epson Model

Epson is a well-known printer manufacturer, and their models are known for their exceptional performance and high-quality prints. Every printer and driver is not without flaws. Sometimes problems occur due to technical or mechanical factors beyond our control. The Epson error code 0x97 is one of the most common errors that users encounter with Epson printers.

This error can occur with any Epson printer or other Epson model. This is a very annoying problem, and many Epson printer owners have reported it. This problem has a simple solution, which we will discuss below. Let’s start with a description of the error and its possible causes.

What is the Epson WF-3640 error code 0x97?

If you print for an extended period of time, the Epson WF-3640 error code is 0x97. This error can occur instantly, with no warning or warning signs. This error can harm your printer’s basic operation by interfering with a signal that allows the device to turn on and off. The issue must be resolved immediately so that you can continue to use your printer.

On the printer’s LED screen, an Epson error code of 0x97 can be seen. This error occurs while printing and causes the printer to unexpectedly stop. This error is most commonly encountered with Epson WF-3640, Epson 252 Ink, and Epson 786 Ink models.

When there is an internal problem with your printer’s hardware, an Epson 0x97 error message is displayed. This error is most likely caused by a problem with your printer’s internal components and could be caused by a motherboard problem or internal component failure. Don’t be alarmed if your WF-3640 or any Work Force printer displays an Epson error code of 0x97. Try these simple troubleshooting steps before sending your printer to a repair shop.

Before continuing, cancel all print jobs and clear any paper jams in the printer. This is a simple procedure that may or may not work depending on the cause of the error. After you’ve removed all paper jams from the printer, unplug any other cables, such as power cords, cable wires, and so on.

For 1 minute, press and hold the Power button on your printer. Plug everything back in, including the Epson cartridges, into their respective slots. Turn on the printer by pressing the Power button. Next, run a test print. Check for any possible changes. Continue troubleshooting if the Epson 0x97 does not stop working or returns after printing a few pages.

2.Reset your Printer

This troubleshooting method is almost identical to the previous one. Disconnect all cables from your printer. Let your printer rest for approximately five minutes before proceeding. Next, hold the Power button for approximately 1 minute, and keep pressing the Power button for 1 minute. Then, reconnect each cable. This may require the assistance of another person.

Hold the Power button for one minute more, then release. To determine if any improvements are possible, run a test print. If Epson printer error code 02×97 persists, the final method might be the answer.

3.Clean the Print Head

Sometimes, an Epson error 0x97 can be caused by a dirty or clogged printhead. The solution is to clean the printhead if this is the case thoroughly. These are the steps to clean an Epson printer’s printhead.

Step 1 Take out each ink cartridge from the printer head one at a time. Invert the ink cartridges and place them on top of a piece of paper or towel. Next, remove the printhead carefully from the printer.

Step 2 Clean the bottom of your printhead with a clean, dry cloth dampened in warm water. Continue cleaning the nozzle until no more black ink is visible on the fabric.

Step 3 Soak your printhead for 10 minutes in warm water. Use only warm water. Place a paper towel on the bottom and allow the printhead to soak. Remove the printhead from its bowl and clean it with a dry, lint-free cloth.

Step 4 Lay the printhead on a towel and let it air dry for 15 minutes. Next, place the printhead in the carriage and reinstall the cartridges in their respective slots. Check to see if any changes have occurred.

4.Update and install your printer driver

You may also have malware causing the Epson error code 0x97. Install or update the malware protection on your printer if this is the case.

Final Step to fix an Epson Error code 0x97

Is the warranty on your Epson printer still valid? Contact customer service to resolve the issue if your warranty is still valid.

If customer service cannot resolve the problem, you can request a replacement. Epson printer error code 0.97 means your printer is not operational. If they cannot fix your printer, Epson will replace it, and your warranty should be used first.

Related Articles

Back to top button